FANDOM


DescriptionEdit

The oil presure sensor is located below the distributor. It is fairly simple to replace. The only small issue is with limited space to operate the spanner. One thing to note is that the size of the nut on the sensor to be removed and the replacement sensore may be different.

Esitmated Time: 5 minutes

Difficultly Level: 2 (1-10 scale)

ToolsEdit

1/2 inch and 7/8 inch spanner

InstructionsEdit

  1. Locate the oil pressure sensor.
  2. Remove the spade connetor.
  3. Unscrew the and remove the sensor.
  4. Screw in the new sensor.
  5. Refit the spade connector.

Ad blocker interference detected!


Wikia is a free-to-use site that makes money from advertising. We have a modified experience for viewers using ad blockers

Wikia is not accessible if you’ve made further modifications. Remove the custom ad blocker rule(s) and the page will load as expected.